|
Posted by Gunner Asch on January 22, 2010, 7:20 am
Please log in for more thread options
Ive been cleaning out my various bins, drawers and cabinets, getting
stuff togther for the big Clausing 15x40 lathe and whatnot,,,and keep
finding drill chucks. Ive got chucks with #1 MT spuds all the way up to
#4 Mt with 3/4" jacobs drill chucks on them. All are in excellent
condition, some appear nearly new..a couple ARE new.
Anyone need anything? I figure I can sell some of them and buy that
damned expensive belt that I need for the Clausing lathe and still be
able to buy dog and cat food. <G> They would probably bite me if I let
em go hungry and bought that $100 belt.
Ive got chucks with R8 holders, chucks with threaded ass ends (looks
like 1/2-20..Ill check on them.
Frankly..Ive got at least 20 good drill chucks and I damned sure dont
need that many.
I could use both NMTB 30 and NMTB 40 tool holders with either drill
chucks or tapers for installing drill chucks, if anyone has any kicking
around as spares.
Anyone?
Gunner
The current Democratic party has lost its ideological basis for
existence.
- It is NOT fiscally responsible.
- It is NOT ethically honorable.
- It has started wars based on lies.
- It does not support the well-being of americans - only billionaires.
- It has suppresed constitutional guaranteed liberties.
- It has foisted a liar as president upon America.
- It has violated US national sovereignty in trade treaties.
- It has refused to enforce the national borders.
...It no longer has valid reasons to exist.
Lorad474
|
|
Posted by Randy on January 22, 2010, 2:26 pm
Please log in for more thread options
On Fri, 22 Jan 2010 04:20:03 -0800, Gunner Asch
>Ive been cleaning out my various bins, drawers and cabinets, getting
>stuff togther for the big Clausing 15x40 lathe and whatnot,,,and keep
>finding drill chucks. Ive got chucks with #1 MT spuds all the way up to
>#4 Mt with 3/4" jacobs drill chucks on them. All are in excellent
>condition, some appear nearly new..a couple ARE new.
>
>Anyone need anything? I figure I can sell some of them and buy that
>damned expensive belt that I need for the Clausing lathe and still be
>able to buy dog and cat food. <G> They would probably bite me if I let
>em go hungry and bought that $100 belt.
>
>Ive got chucks with R8 holders, chucks with threaded ass ends (looks
>like 1/2-20..Ill check on them.
>
>Frankly..Ive got at least 20 good drill chucks and I damned sure dont
>need that many.
>
I could use a 16N chuck with a #2 MT, I could trade you one that
holds a drill crooked. I might be able to use just a jaw repair kit
too if anyone has one of those.
Thank You,
Randy
Remove 333 from email address to reply.
|
|
Posted by Gunner Asch on January 22, 2010, 3:48 pm
Please log in for more thread options
>On Fri, 22 Jan 2010 04:20:03 -0800, Gunner Asch
>
>>Ive been cleaning out my various bins, drawers and cabinets, getting
>>stuff togther for the big Clausing 15x40 lathe and whatnot,,,and keep
>>finding drill chucks. Ive got chucks with #1 MT spuds all the way up to
>>#4 Mt with 3/4" jacobs drill chucks on them. All are in excellent
>>condition, some appear nearly new..a couple ARE new.
>>
>>Anyone need anything? I figure I can sell some of them and buy that
>>damned expensive belt that I need for the Clausing lathe and still be
>>able to buy dog and cat food. <G> They would probably bite me if I let
>>em go hungry and bought that $100 belt.
>>
>>Ive got chucks with R8 holders, chucks with threaded ass ends (looks
>>like 1/2-20..Ill check on them.
>>
>>Frankly..Ive got at least 20 good drill chucks and I damned sure dont
>>need that many.
>>
>
>I could use a 16N chuck with a #2 MT, I could trade you one that
>holds a drill crooked. I might be able to use just a jaw repair kit
>too if anyone has one of those.
Ill do an inventory this afternoon and post it. Whats a good one worth
to you?
I dont have any repair kits unfortunately. Shrug..when I wound up with
all these chucks...I didnt figure I needed any.
>
>Thank You,
>Randy
>
>Remove 333 from email address to reply.
|
|
Posted by Ignoramus6241 on January 22, 2010, 2:56 pm
Please log in for more thread options
I would like an R8 16N chuck.
Myself, I have a bunch of MT2 Jacobs superchucks for sale.
i
|
|
Posted by Gunner Asch on January 22, 2010, 3:51 pm
Please log in for more thread options
On Fri, 22 Jan 2010 13:56:44 -0600, Ignoramus6241
>I would like an R8 16N chuck.
>
>Myself, I have a bunch of MT2 Jacobs superchucks for sale.
>
>i
Thats 1/8-58" Ive got at least 4 of them..I think Ive got a couple with
R8.
Whats a very good condiiton one worth to you? Oh...I may have one or
two chuck keys available..but not many for any of the chucks.
Make me an offer.
Gunner
|
| Similar Threads | Posted | | Drill chucks | January 22, 2010, 8:38 pm |
| WTB- two 6" 2 jaw chucks | July 4, 2009, 5:54 am |
| Milling Chucks | July 28, 2006, 1:08 pm |
| Vacuum Chucks. | August 10, 2006, 6:35 pm |
| Drill Sharpeners | July 2, 2009, 10:21 pm |
| Drill Drift | July 5, 2009, 10:24 am |
| Re: Everybody else can drill the holes .... | September 4, 2009, 4:13 pm |
| Re: Everybody else can drill the holes .... | September 4, 2009, 4:35 pm |
| Re: Drill speeds & feeds | April 24, 2006, 5:41 pm |
| Drill speeder for CNC lathe | May 26, 2006, 8:07 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>stuff togther for the big Clausing 15x40 lathe and whatnot,,,and keep
>finding drill chucks. Ive got chucks with #1 MT spuds all the way up to
>#4 Mt with 3/4" jacobs drill chucks on them. All are in excellent
>condition, some appear nearly new..a couple ARE new.
>
>Anyone need anything? I figure I can sell some of them and buy that
>damned expensive belt that I need for the Clausing lathe and still be
>able to buy dog and cat food. <G> They would probably bite me if I let
>em go hungry and bought that $100 belt.
>
>Ive got chucks with R8 holders, chucks with threaded ass ends (looks
>like 1/2-20..Ill check on them.
>
>Frankly..Ive got at least 20 good drill chucks and I damned sure dont
>need that many.
>