|
Posted by on September 5, 2008, 5:49 pm
Please log in for more thread options On Sep 5, 2:37=A0pm, "John R. Carroll"
> Joe AutoDrill wrote:
> >> Joe, Try these guys:
>
> >>http://www.destinytool.com/downloads/SPECIALTOOLForm.pdf
>
> >> Scroll down to page 3
>
> > I'll take a look as soon as Verizon decides that internet access
> > should be part of what I'm provided again... =A0(temporary outage of
> > outgoing e-mail and internet but newsgroups work?!?)
>
> I had something similar happen on each of three trips to Iraq.
> My mail client was blocked but the bone heads allowed usenet access
> unmolested.
> Rather than go through a lot of crap, I had the exchanges I needed with g=
uys
> in the states using a low traffic news group.
> You can probably still Google the posts. We were using one of the Britney
> Spears groups.
> The guys from Fluor that I was with on the first trip over were laughing
> their asses off.
>
> --
>
> =A0 =A0 =A0 =A0 =A0 =A0John R. Carroll
> =A0www.machiningsolution.com
are you suggesting al-queda could be planning the next attack on a
brittany spears forum ?
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> They would like to buy a HSS or coated tool capable of drilling 8mm, 10mm
> and 15mm in closely spaced "steps" on the drill.
>
> Anyone know a good source for such custom tooling? Round shank tooling with
> a 0.750" or smaller shank please... If it matters.
>
> Volume is low to medium on this special, simple tool.
>
> Regards,
> Joe Agro, Jr.