1 1/16 square section lip seal source needed

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
1 1/16 square section lip seal source needed Wes 07-26-2007
Posted by Wes on July 26, 2007, 2:52 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on July 26, 2007, 11:20 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Wes on July 27, 2007, 10:32 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Pure Iron source needed (USA) May 9, 2008, 6:50 pm
Generic source for air cylinder seals needed April 3, 2007, 3:29 pm
Source for loose 3mm ball bearings needed March 20, 2008, 10:35 pm
Small dovetail cutters Source needed. May 21, 2008, 5:24 pm
Source for really small screw extractors needed October 16, 2008, 7:49 pm
Source needed, something equivalent to these Continental Abrasive metal prep disks September 24, 2007, 4:49 pm
Box section welding... December 25, 2006, 9:43 am
Turning a reduced section? October 28, 2006, 6:35 pm
Section modulus for T beam October 2, 2007, 9:24 am
Twisting 2" square tube and 1" square steel December 26, 2006, 1:22 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap