20 inch Steptoe Shaper info needed.

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
20 inch Steptoe Shaper info needed. buffalo 01-18-2007
Posted by buffalo on January 18, 2007, 10:59 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by steamer on January 19, 2007, 12:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on January 19, 2007, 2:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by John on January 19, 2007, 1:40 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
SHAPER; I stepped down from the Steptoe. January 21, 2007, 10:58 pm
7 Inch South Bend Shaper April 10, 2006, 3:16 pm
Flather shaper info April 23, 2007, 9:42 am
25" Smith & Mills shaper info January 23, 2007, 9:15 am
AAMCO Shaper info request. April 22, 2007, 10:37 pm
Atlas shaper advice needed May 16, 2008, 12:11 am
"around the corner" drive info needed. October 1, 2006, 6:29 pm
Welding machine-Tig info needed October 21, 2006, 6:52 pm
info needed on Victoria drill press March 4, 2007, 9:45 pm
shaper disassembly September 19, 2006, 2:08 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap