3 phase welder

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

02-04-2007

Posted by John on February 4, 2007, 3:28 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by Jerry Martes on February 4, 2007, 5:02 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Ignoramus10353 on February 4, 2007, 5:13 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Jerry Martes on February 4, 2007, 5:19 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Ignoramus10353 on February 4, 2007, 5:25 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Solder or heat shrink and brazing with a MIG welder, Century Solar 2150 welder	January 8, 2007, 1:38 am
profit-motive question: single phase adapter for 3-phase motor drives	October 4, 2007, 5:30 pm
FA: cool (and qute old) phase sequence indicator (for testing three phase power)	October 21, 2006, 1:56 am
Replacement lathe tool posts Phase II, Phase 2 and HF 39083 comparison	January 7, 2007, 10:46 am
[ADV] Phase-A-Matic Phase Converter on EBay Item # 230127447458	May 10, 2007, 5:42 pm
Rotary phase converter versus trying to run a VMC straight from single phase	February 19, 2008, 12:44 am
Is it practical for a RPC to generate 440 volt 3-phase from 220 single phase?	November 27, 2006, 10:03 pm
3 phase 200V, on (nominal 240) rotary phase converter	December 28, 2007, 4:27 pm
3-phase vs single-phase heating elements	August 18, 2007, 4:30 pm
FS -- Electromotoren Getriebe, single phase in, 5 HP 3 phase out	September 20, 2007, 6:21 pm

XML Sitemap