36" metal door, which mill will fit thru it?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
36" metal door, which mill will fit thru it? James Lerch 10-18-2007
Posted by James Lerch on October 19, 2007, 12:47 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jon Elson on October 21, 2007, 5:01 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joseph Gwinn on October 18, 2007, 10:08 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Wes on October 19, 2007, 3:53 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
widening door opening to move heavy metal into shop March 5, 2007, 1:18 pm
Basic Metal mill question July 6, 2006, 12:57 pm
Metal Mill and Lathe Project. December 5, 2006, 11:31 pm
Compress the spring in my SUV Door? July 18, 2006, 3:31 pm
Plaster in a refrigerator door? PLS HELP October 7, 2006, 3:09 am
Garage Door motor November 13, 2006, 8:41 pm
sticky sliding door January 4, 2007, 9:28 am
[Fwd: Re: sticky sliding door] January 5, 2007, 9:40 pm
Sagging garage door February 25, 2007, 11:05 pm
Garage door update.... April 30, 2008, 8:20 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap