5/8" Solid Stainless Rod Bending Anyone?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
5/8" Solid Stainless Rod Bending Anyone? Joe AutoDrill 05-16-2007
Posted by kfvorwerk@gmail.com on May 18, 2007, 9:08 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joe AutoDrill on May 18, 2007, 9:10 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by dcaster@krl.org on May 17, 2007, 10:11 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Vincenzo on May 16, 2007, 9:05 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joe AutoDrill on May 17, 2007, 8:10 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Bending 304 stainless steel October 23, 2006, 9:23 am
Bending 4mm dia stainless steel rod December 5, 2006, 11:51 am
help bending 1.5 stainless tubing December 7, 2006, 10:06 pm
Stainless steel tube bending January 9, 2008, 12:09 pm
Stainless steel nuts galling on stainless steel bolts April 9, 2006, 12:24 pm
Solid Edge Training October 26, 2007, 10:56 am
solid state relay? December 16, 2007, 10:56 pm
Solid Plastic Tools September 9, 2008, 3:38 pm
source for solid state inverter? January 16, 2007, 9:41 pm
Hydraulic Bender for Solid and/or Tube May 15, 2007, 9:05 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap