7075 aluminum issues

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
7075 aluminum issues sunshine-x 07-31-2006
Posted by sunshine-x on July 31, 2006, 8:35 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Sehr on July 31, 2006, 8:52 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by sunshine-x on July 31, 2006, 10:05 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on July 31, 2006, 9:21 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by sunshine-x on July 31, 2006, 10:06 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Drilling a 1/16th hole 3.75" long in 7075. July 13, 2007, 11:44 pm
Re: DiAcro PDF issues May 13, 2006, 12:48 am
More motor issues June 14, 2008, 10:31 am
Abrasive Cutoff Saw Issues November 26, 2008, 5:33 pm
Root Cause Analysis Issues December 12, 2008, 1:23 pm
Fixing oversized gear issues? February 11, 2008, 12:40 am
fa: 126 issues of home shop machinst, from issue #1 September 19, 2008, 4:12 pm
65 IRON-MEN ALBUM Magazine back issues on eBay July 8, 2006, 7:50 pm
if you'll guarantee Ayaz's supper with issues, it'll independently aim the mass August 12, 2007, 10:01 pm
eBay: Home Shop Machinist magazine - complete set of 156 issues (1982-2007) January 31, 2008, 5:19 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap