|
Posted by spaco on July 17, 2008, 8:19 am
Please log in for more thread options A friend of mine bought a 10" southbend of about that age for $1000 2
years ago. It had much more tooling than you describe here and it has a
quick change gearbox. It was on it's own legs. We drove about 150
miles RT to pick it up. This is rural western Wisconsin. We found it
on craigslist.
Note: I didn't understand the how the "4 jaw 12 inch" could fit this
lathe.
Pete Stanaitis
------------------------------
RoyJ wrote:
> List them (separately) on craigslist and see if they go. If not, use ebay.
>
> dancearoundny wrote:
>
>> OK
>> my eyes are giving out so i am dancing tango instead of metal working.
>> Where do you guys recommend i sell this beaty or beast
>>
>> 9 inch South Bend lathe with
>> 6 jaw , 3 jaw and (4 jaw inport 12 inch ) fits on the south bend
>> mounted on a bench
>>
>> probably 1940 vintage .
>> for pick up Brooklyn New York
>> ready to run
>> not the quick change model.
>> email to danek11218@yahoo.com
>>
>> can send or post photo
>>
>> I also have a Closing floor drill press morse taper , continues speed
>> control. perfect centering.
>>
>> and small vertical milling machine
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> my eyes are giving out so i am dancing tango instead of metal working.
> Where do you guys recommend i sell this beaty or beast
>
> 9 inch South Bend lathe with
> 6 jaw , 3 jaw and (4 jaw inport 12 inch ) fits on the south bend
> mounted on a bench
>
> probably 1940 vintage .
> for pick up Brooklyn New York
> ready to run
> not the quick change model.
> email to danek11218@yahoo.com
>
> can send or post photo
>
> I also have a Closing floor drill press morse taper , continues speed
> control. perfect centering.
>
> and small vertical milling machine