Advice please: cheapo source for light machine skate bearings?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Advice please: cheapo source for light machine skate bearings? jmcman 01-03-2007
Posted by jmcman on January 3, 2007, 2:12 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by William Noble on January 3, 2007, 2:34 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on January 3, 2007, 8:47 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Pete C. on January 3, 2007, 9:00 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by William Noble on January 3, 2007, 3:06 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Re: Looking for Source for small thrust bearings December 6, 2007, 9:37 pm
Re: Looking for Source for small thrust bearings December 6, 2007, 9:59 pm
Re: Looking for Source for small thrust bearings December 7, 2007, 6:49 am
Re: Looking for Source for small thrust bearings December 13, 2007, 9:21 pm
fa: fiber optic specialties light source (for microscope, borescope, etc) November 25, 2008, 12:35 am
Source for loose 3mm ball bearings needed March 20, 2008, 10:35 pm
Re: any advice on where to start to build my own CNC machine? September 1, 2006, 2:45 pm
Need advice on buying a good tap & die set for small machine work September 5, 2008, 8:09 pm
OT: in-line skate brake December 9, 2007, 2:37 pm
Kaydon Bearings Ulta slim bearings - cost is prohibitive -Alternative supplier?? October 25, 2007, 5:24 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap