Changing the belt on a Wissota Grinder

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

Changing the belt on a Wissota Grinder

Randy79

04-20-2007

Re: Changing the belt on a Wissota Grinder

stans4

04-20-2007

Posted by Randy79 on April 20, 2007, 10:51 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by on April 20, 2007, 12:02 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
I'd rather fight than switch! (changing speeds on belt driven lathe)	August 6, 2007, 11:11 am
Continuously-Variable Speed Drill Press - Recommendation Needed (no belt-changing pulleys!)	October 18, 2006, 2:53 pm
Variable torque motor for belt grinder ?	November 22, 2006, 12:14 pm
Rubber for belt grinder drive wheel?	July 17, 2007, 7:41 pm
Belt grinder speed followup (project outcome)	November 25, 2006, 5:37 pm
Fastening rubber cover on belt grinder contact wheel	January 25, 2007, 11:20 am
www.BeltPolice.Com Belt Holsters Accessories Bargains Leather DUTY POLICE Law Enforcement BELT	August 14, 2007, 11:34 pm
www.BeltPolice.Com Belt Holsters Accessories Bargains Leather DUTY POLICE Law Enforcement BELT	August 14, 2007, 11:36 pm
nipples grinder ... er ... benchtop grinder. :-)	February 20, 2007, 9:41 am
Changing oil in air compressors--how often	November 10, 2006, 1:52 pm

XML Sitemap