Circle cutter for wood or thin sheet metal

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Circle cutter for wood or thin sheet metal Roger Paskell 05-26-2007
Posted by Roger Paskell on May 26, 2007, 5:37 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on May 26, 2007, 9:27 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Roger Paskell on May 26, 2007, 11:53 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bruce on May 26, 2007, 9:47 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Trevor Jones on May 26, 2007, 10:31 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Tin snips are tools used to cut thin sheet metal. February 27, 2008, 6:15 pm
cutting sheet aluminum on 12 inch wood bandsaw June 19, 2008, 3:27 pm
Cutting hole in thin gauge metal-perhaps little ot July 5, 2007, 11:42 am
3 in 1 Sheet Metal Help! March 18, 2007, 10:55 pm
Wood Gas, Lots of metal, but a little OT March 19, 2008, 10:26 am
sheet metal forming August 5, 2006, 4:42 pm
STAMPING SHEET METAL April 6, 2007, 2:53 am
Welding Sheet Metal May 28, 2007, 1:55 am
How to relax sheet metal? March 8, 2006, 2:08 am
Sheet metal notchers October 31, 2008, 2:12 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap