Cold saw question

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cold saw question Steve B 10-26-2006
Posted by Steve B on October 26, 2006, 11:38 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus32469 on October 26, 2006, 11:40 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jon on October 26, 2006, 10:14 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Proctologically Violated©® on October 26, 2006, 10:59 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
New pictures -- cold saw works -- blade question September 28, 2008, 12:15 am
Hot or cold cutting? Hack a cutoff saw to cold saw? August 8, 2007, 3:20 pm
cold saw recommendations? January 2, 2007, 6:17 pm
still looking for a cold saw in Seattle January 29, 2007, 10:56 pm
DIY Cold Saw Project Pix March 31, 2007, 10:09 pm
cold saw blades TPI? April 17, 2007, 1:36 am
Cold saw vs. bandsaw April 24, 2007, 1:40 pm
Grizzly "cold saw" August 8, 2007, 3:30 pm
My mister has a cold October 3, 2008, 1:05 am
Bandsaw vs cold saw November 27, 2008, 11:09 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap