Cracked Bridgeport Right angle milling attachment

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cracked Bridgeport Right angle milling attachment oldjag 04-01-2007
Posted by oldjag on April 1, 2007, 2:47 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on April 1, 2007, 8:14 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by James P Crombie on April 1, 2007, 10:31 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
fa: palmgren milling attachment for your lathe March 2, 2008, 2:34 am
Use of a bridgeport shaper attachment August 8, 2007, 8:09 am
Re: Can anyone identify this Bridgeport?? - 1 attachment (1/2) March 8, 2008, 5:37 pm
Bridgeport QuillMaster attachment and N2 collets January 5, 2009, 4:10 pm
fa: atlas and south bend milling attachment for 10/12 inch lathe January 27, 2008, 1:59 am
Compound angle milling? March 28, 2008, 9:59 am
Bridgeport milling machines. August 23, 2007, 9:55 am
Bridgeport milling questions December 10, 2008, 6:04 am
FA: hydraulic pump, right angle gear drive, very heavy caster, Oil pump from large milling machine April 26, 2006, 1:29 am
Bridgeport series I milling' machine manual January 24, 2008, 8:42 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap