Craftsman/Atlas lathe available

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Craftsman/Atlas lathe available NokNokMan 07-04-2007
Posted by NokNokMan on July 4, 2007, 12:26 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by K. A. Cannon on July 4, 2007, 1:54 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by DoN. Nichols on July 4, 2007, 8:20 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Re: HELP Designing lathe spindle, bearings questions, WTB: Lathe headstocks July 2, 2006, 9:53 pm
Continuing lathe chatter (from people now, not the lathe. :-) May 21, 2008, 1:19 am
Re: Continuing lathe chatter (from people now, not the lathe. :-) May 25, 2008, 12:12 am
Re: Continuing lathe chatter (from people now, not the lathe. :-) June 1, 2008, 11:51 am
Re: Continuing lathe chatter (from people now, not the lathe. :-) June 2, 2008, 10:13 pm
Re: Continuing lathe chatter (from people now, not the lathe. :-) June 9, 2008, 9:48 pm
Re: Lathe Oil used August 15, 2006, 6:30 pm
Re: Lathe Oil used August 16, 2006, 8:19 am
Value of a lathe September 29, 2006, 11:21 pm
7" by 10" HF lathe November 2, 2006, 9:13 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap