Creating change gears for Emco Maximat 7...

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Creating change gears for Emco Maximat 7... mrc3 12-07-2006
Posted by on December 7, 2006, 11:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on December 8, 2006, 12:08 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on December 8, 2006, 3:11 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on December 11, 2006, 11:47 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
EMCO MAXIMAT 10 January 5, 2008, 3:46 am
Proper lube for Emco MAXIMAT lathe? June 8, 2008, 1:31 pm
FS: Change gears in Olympia, WA October 29, 2006, 7:17 pm
Of change gears and QC gearboxes July 28, 2008, 3:19 pm
RE: Of change gears and QC gearboxes August 7, 2008, 9:26 pm
Harrison 9" and Harrison 140 change gears November 9, 2006, 3:26 pm
Creating an armour May 8, 2007, 3:59 am
they are creating such as previous, off uncomfortable, away from broken tablets August 12, 2007, 7:37 pm
i was rolling laws to multiple Mel, who's creating regarding the ball's cafe August 12, 2007, 10:41 pm
Emco lathe August 1, 2007, 10:56 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap