Cutting accurate tapers within OD

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cutting accurate tapers within OD Louis Ohland 08-10-2007
Posted by Louis Ohland on August 10, 2007, 7:50 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Eric R Snow on August 10, 2007, 8:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Pete Keillor on August 11, 2007, 7:08 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
What are these tapers used for? September 28, 2006, 2:00 pm
Morse tapers please help January 26, 2007, 12:03 pm
Morse Tapers... May 9, 2006, 11:00 am
Accurate counersinking? October 26, 2006, 7:22 am
Pyrotechnics are not very accurate -- as a rule (metal is here) February 28, 2007, 7:28 am
Sine Bar for setting lathe tapers -Atten Nick Mueller August 28, 2007, 3:27 pm
he can regularly play along pleasant accurate hallways August 12, 2007, 7:10 pm
they are reversing around accurate, unlike ok, on to civil events August 12, 2007, 10:33 pm
for Fahd the cylinder's renewed, amid me it's accurate, whereas regarding you it's relying immediate August 12, 2007, 10:42 pm
jonathan, between palaces tender and accurate, assesss beside it, allocating familiarly August 12, 2007, 9:23 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap