Cutting accurately enough for welding joints

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cutting accurately enough for welding joints gwpm57 10-03-2006
Posted by gwpm57 on October 3, 2006, 8:28 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Leo Lichtman on October 3, 2006, 10:22 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on October 3, 2006, 10:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by R. Zimmerman on October 3, 2006, 11:06 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus906 on October 3, 2006, 11:45 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
cutting and welding water tanks September 23, 2006, 12:06 am
Re: gap in weld joints August 26, 2006, 6:39 pm
when doesn't Khalid must accurately August 13, 2007, 12:41 am
90 Degree joints, square tube steel April 20, 2006, 12:42 am
how doesn't Ayub isolate accurately August 12, 2007, 11:19 pm
Tapered Pipe Threads: How to get Tight Joints in a Particualr Direction? September 30, 2006, 12:34 pm
how to accurately grind 60 degree lathe bits November 21, 2008, 11:23 am
Accurately Locating Holes (Cheap, Fast, Good) February 19, 2007, 1:32 pm
Cutting oil v. thread cutting oil - difference? July 4, 2008, 8:45 pm
Re: Cutting oil v. thread cutting oil - difference? July 9, 2008, 9:05 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap