Cutting aluminum bars with saw designed for wood

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cutting aluminum bars with saw designed for wood mc 07-07-2007
Posted by mc on July 7, 2007, 10:25 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Morris Dovey on July 7, 2007, 10:48 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Chandler on July 8, 2007, 1:04 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by beecrofter on July 8, 2007, 11:57 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
cutting sheet aluminum on 12 inch wood bandsaw June 19, 2008, 3:27 pm
un-brazing silver bars from coppper bars January 15, 2007, 2:04 pm
Re: un-brazing silver bars from coppper bars January 16, 2007, 9:57 pm
Blades for cutting aluminum? July 1, 2007, 10:20 pm
Best Tool for Cutting Aluminum Rod July 2, 2007, 10:24 am
Help cutting aluminum panel December 6, 2007, 9:50 pm
Need help making a jig cutting 2 1/4 inch aluminum plate May 13, 2007, 8:20 pm
Pretty good cutting fluid for aluminum June 26, 2007, 2:37 pm
Rotary tool bit for cutting crosswise through 1/16" - 1/8" thick aluminum? October 1, 2008, 1:51 pm
What are these pliers designed for? November 8, 2008, 7:00 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap