|
Posted by on May 1, 2008, 10:15 am
Please log in for more thread options
On Wed, 30 Apr 2008 21:31:03 -0700, "Roger Paskell"
Greetings Roger,
There are several types of water soluble coolant that are good for
sawing. I assume you will be using such a small amount it doesn't
really matter what you use. So here's a suggestion: Look for a saw
blade supplier in your area. Just buy the cheapest stuff they have.
Rust-Lick makes a good coolant that sells in 1 gallon containers. It
will need to be diluted about 20 to 1 so 1 gallon lasts a long time. I
personally use a pretty benign formulation in all my machines but it
is only available starting in 5 gallon buckets. It's Blasocut 2000cf.
But I used Ruct-Lick in my saw for years before I switched.
Cheers,
Eric
>Guys,,,,I was hoping for a more definitive answer,,,synthetic,,,,
>natural,,,, Mobil, ,,,,Atlantic etc.....
>Roger
>
>
>>I have just purchased a new 7X12 metal cutting bandsaw, and I can't seem to
>>find any good information about what cutting fluid or coolant to use.
>> Roger
>>
>>
>
>
|
|
Posted by John L. Weatherly on May 1, 2008, 9:01 am
Please log in for more thread options
Roger Paskell wrote:
> I have just purchased a new 7X12 metal cutting bandsaw, and I can't seem
> to find any good information about what cutting fluid or coolant to use.
> Roger
I use this stuff. I dilute it on the thinner end of the scale. Lasts a
while.
http://www.use-enco.com/CGI/INSRIT?PMAKA=505-2057&PMPXNO=946817&PARTPG=INLMK32
--
John L. Weatherly
please remove XXXs to reply via email
|
|
Posted by Doug White on May 3, 2008, 3:53 pm
Please log in for more thread options Keywords:
>Oh Gunner. Elbonian - I know what you read in the comics !!
>Been there had it done to me.
Does anyone remember the Brungarians? They were the bad guys in the Tom
Swift Jr books. They always wore dark, ill-fitting suits...
Doug White
|
|
Posted by Spehro Pefhany on May 3, 2008, 5:52 pm
Please log in for more thread options On Sat, 03 May 2008 19:53:12 GMT, the renowned gwhite@alum.mit.edu
(Doug White) wrote:
>Keywords:
>>Oh Gunner. Elbonian - I know what you read in the comics !!
>>Been there had it done to me.
>
>Does anyone remember the Brungarians? They were the bad guys in the Tom
>Swift Jr books. They always wore dark, ill-fitting suits...
>
>Doug White
Ah, yes. Brungarians. OTOH, I *don't* recall Tom & Bud having to chase
$#$$# Airworthiness Certificates every time they wanted to fly some
bizzare contraption. Or burning the midnight oil writing
documentation.
Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
|
|
Posted by John R. Carroll on May 3, 2008, 5:49 pm
Please log in for more thread options Spehro Pefhany wrote:
> On Sat, 03 May 2008 19:53:12 GMT, the renowned gwhite@alum.mit.edu
> (Doug White) wrote:
>
>> Keywords:
>>> Oh Gunner. Elbonian - I know what you read in the comics !!
>>> Been there had it done to me.
>>
>> Does anyone remember the Brungarians? They were the bad guys in the
>> Tom
>> Swift Jr books. They always wore dark, ill-fitting suits...
>>
>> Doug White
>
>
> Ah, yes. Brungarians. OTOH, I *don't* recall Tom & Bud having to chase
> $#$$# Airworthiness Certificates every time they wanted to fly some
> bizzare contraption. Or burning the midnight oil writing
> documentation.
Have a run in with a DER have we?
<G>
--
John R. Carroll
www.machiningsolution.com
|
| Similar Threads | Posted | | Cutting fluid | March 17, 2007, 1:48 pm |
| old - really old - cutting fluid? | May 3, 2007, 7:32 pm |
| Used motor oil as cutting fluid | August 3, 2008, 4:25 pm |
| Alcohol as cutting fluid? | August 4, 2008, 5:12 pm |
| Pretty good cutting fluid for aluminum | June 26, 2007, 2:37 pm |
| liquid wrench be ok as a cutting or tapping fluid ? | August 11, 2007, 7:32 pm |
| Using oil emulsion cutting fluid for hand tapping | January 17, 2008, 12:16 am |
| What mcmaster item for cutting fluid (lathe+steel) | August 3, 2008, 11:29 pm |
| Forklift steering fluid ? | July 9, 2006, 12:30 pm |
| Fluid for ultrasonic cleaner | October 1, 2006, 1:32 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>natural,,,, Mobil, ,,,,Atlantic etc.....
>Roger
>
>