Cutting hardened Gears

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cutting hardened Gears oldjag 04-29-2007
Posted by oldjag on April 29, 2007, 1:48 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Anthony on April 29, 2007, 7:08 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on April 29, 2007, 7:41 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by oldjag on April 30, 2007, 1:19 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Hunter on April 30, 2007, 1:25 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
cutting a keyway in a hardened & ground shaft July 24, 2006, 10:20 pm
Cutting Involute Gears May 2, 2008, 3:07 pm
cutting small involute spur gears January 26, 2007, 4:23 pm
Hardened lock shackles? April 29, 2007, 12:04 am
Turning 4140 Pre Hardened June 23, 2007, 10:46 am
Soaped, hardened parts have less scale. Why? November 5, 2006, 12:28 am
"Unhardening" hardened punches to deform them May 14, 2007, 8:42 am
Re: Drilling hardened carbon steel set screw? July 12, 2006, 4:17 pm
Help! Drilling out a broken 6-32 hardened steel set screw... December 3, 2006, 1:21 am
Compressive yield strength of 4140 versus A2 tool steel hardened to RC 55-60 December 14, 2006, 8:31 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap