DOM Square Tube - Twist and Straightness

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
DOM Square Tube - Twist and Straightness timmy_p 11-07-2007
Posted by Ned Simmons on November 13, 2007, 2:42 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by dcaster@krl.org on November 13, 2007, 3:49 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dom on November 13, 2007, 8:48 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Trying to twist square tubing November 15, 2006, 5:01 pm
Twisting 2" square tube and 1" square steel December 26, 2006, 1:22 pm
Slotting Square Tube March 20, 2006, 9:26 pm
internal debur of square tube? October 11, 2006, 7:23 pm
How to drill series of holes in square tube. December 31, 2006, 3:56 pm
painting inside of square steel tube July 16, 2007, 5:17 pm
90 Degree joints, square tube steel April 20, 2006, 12:42 am
Revisiting: multiple holes in square aluminum tube October 6, 2006, 8:04 pm
Re: Strength of materials question: square tube vs angle iron April 14, 2008, 11:25 am
Re: Strength of materials question: square tube vs angle iron April 14, 2008, 11:44 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap