|
Posted by =?ISO-8859-1?Q?Nick_M=FCller?= on May 12, 2006, 1:27 pm
Please log in for more thread options
Hi!
I have written a section what you have to do when your digital scales
(the cheap Chinese ones) are making problems. Especialy if you have a
VFD on your mill / lathe, they are very sensible to electrical noise.
Chapters are:
* shielding the VFD
* mechanical shielding the scales (not just against chips, but also for
the chip (of the scale))
* electrical shielding (dampening capacitor and resistor, short cables,
shielded cables)
The article is online at: <http://www.yadro.de/digital-scale/vfd.html>
*** Let me also take the chance to inform you that ***
*** YADRO has an distributor for USA / Canada. You ***
*** can find him here: <http:www.hobbymetrix.com> ***
Enjoy,
Nick
--
Motor Modelle // Engine Models
<http://www.motor-manufaktur.de>
DIY-DRO // Eigenbau-Digitalanzeige
<http://www.yadro.de>
|
|
Posted by Tom Wait on May 13, 2006, 12:41 pm
Please log in for more thread options
> Hi!
>
> I have written a section what you have to do when your digital scales
> (the cheap Chinese ones) are making problems. Especialy if you have a
> VFD on your mill / lathe, they are very sensible to electrical noise.
>
> Chapters are:
> * shielding the VFD
> * mechanical shielding the scales (not just against chips, but also for
> the chip (of the scale))
> * electrical shielding (dampening capacitor and resistor, short cables,
> shielded cables)
>
> The article is online at: <http://www.yadro.de/digital-scale/vfd.html>
>
>
> *** Let me also take the chance to inform you that ***
> *** YADRO has an distributor for USA / Canada. You ***
> *** can find him here: <http:www.hobbymetrix.com> ***
>
>
> Enjoy,
> Nick
> --
> Motor Modelle // Engine Models
> <http://www.motor-manufaktur.de>
> DIY-DRO // Eigenbau-Digitalanzeige
> <http://www.yadro.de>
Have you got a US distributor yet, Nick?
Tom
|
|
Posted by =?ISO-8859-1?Q?Nick_M=FCller?= on May 13, 2006, 1:00 pm
Please log in for more thread options
> Have you got a US distributor yet, Nick?
USA and Canada. Hobbymetrix.com does both markets.
Nick
--
DIY-DRO // Eigenbau-Digitalanzeige
Available now in USA / Canada
<http://www.yadro.de>
|
|
Posted by Tom Wait on May 13, 2006, 4:11 pm
Please log in for more thread options
>
> > Hi!
> >
> > I have written a section what you have to do when your digital scales
> > (the cheap Chinese ones) are making problems. Especialy if you have a
> > VFD on your mill / lathe, they are very sensible to electrical noise.
> >
> > Chapters are:
> > * shielding the VFD
> > * mechanical shielding the scales (not just against chips, but also for
> > the chip (of the scale))
> > * electrical shielding (dampening capacitor and resistor, short cables,
> > shielded cables)
> >
> > The article is online at: <http://www.yadro.de/digital-scale/vfd.html>
> >
> >
> > *** Let me also take the chance to inform you that ***
> > *** YADRO has an distributor for USA / Canada. You ***
> > *** can find him here: <http:www.hobbymetrix.com> ***
Thanks, looks like they are just getting started.
Tom
|
|
Posted by =?ISO-8859-1?Q?Nick_M=FCller?= on May 13, 2006, 4:56 pm
Please log in for more thread options
> > > *** Let me also take the chance to inform you that ***
> > > *** YADRO has an distributor for USA / Canada. You ***
> > > *** can find him here: <http:www.hobbymetrix.com> ***
>
> Thanks, looks like they are just getting started.
In _that_ business, yes. They are a family run business (two brothers
one sister). Nice people talking to and very focused. I had
eMail-conversation with then for nearly two months.
One brother is an electronics, the other the software-man. They also do
have a small shop. So they know what they are selling.
They do have the PCBs since two weeks, and I pushed them to go online,
because many didn't want to order from Great Britain.
Nick
--
DIY-DRO // Eigenbau-Digitalanzeige
Available now in USA / Canada
<http://www.yadro.de>
|
| Similar Threads | Posted | | Digital scales (DRO like) | December 29, 2006, 3:15 am |
| Mounting 3 digital scales to a 450mm / 105mm lathe | March 30, 2006, 6:31 pm |
| VFDs, Does it make a difference? | October 17, 2006, 12:54 am |
| fs: anyone need a couple of 440V VFDs (1 HP) | April 13, 2008, 1:35 pm |
| VFDs, belt drive, and a lathe | July 26, 2007, 8:15 pm |
| DRO Scales from Littlemachineshop | July 27, 2008, 8:30 pm |
| Frugal SPC equipped scales for DRO | August 5, 2007, 11:06 pm |
| Material Hardness Scales... | January 17, 2008, 7:42 am |
| Need tips troubleshooting Sony LU10A Dro (scales issue) | March 9, 2007, 6:40 pm |
| DRO Mitutoyo (AT11 series); attach connector to linear scales. | April 18, 2007, 1:12 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> I have written a section what you have to do when your digital scales
> (the cheap Chinese ones) are making problems. Especialy if you have a
> VFD on your mill / lathe, they are very sensible to electrical noise.
>
> Chapters are:
> * shielding the VFD
> * mechanical shielding the scales (not just against chips, but also for
> the chip (of the scale))
> * electrical shielding (dampening capacitor and resistor, short cables,
> shielded cables)
>
> The article is online at: <http://www.yadro.de/digital-scale/vfd.html>
>
>
> *** Let me also take the chance to inform you that ***
> *** YADRO has an distributor for USA / Canada. You ***
> *** can find him here: <http:www.hobbymetrix.com> ***
>
>
> Enjoy,
> Nick
> --
> Motor Modelle // Engine Models
> <http://www.motor-manufaktur.de>
> DIY-DRO // Eigenbau-Digitalanzeige
> <http://www.yadro.de>