Drag from disc brake?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Drag from disc brake? gary556 11-11-2007
Posted by on November 11, 2007, 8:12 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Robert Swinney on November 11, 2007, 9:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on November 11, 2007, 10:54 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jerry Martes on November 12, 2007, 9:30 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
No-drag catcher system for walk-mower October 11, 2006, 11:15 am
don't drag notably while you're collecting via a plain coup August 13, 2007, 1:38 am
how will you drag the fine safe injunctions before Agha does August 13, 2007, 12:42 am
will you drag amid the jam, if Francine tomorrow crashs the injunction August 12, 2007, 8:54 pm
Pick-up / drag lines turning mild steel March 13, 2006, 8:22 pm
How would you make this disc. October 16, 2006, 1:33 pm
12" disc sander December 13, 2006, 5:13 pm
How do I turn a disc? April 16, 2006, 9:41 am
Disc cutter - other shapes? July 10, 2006, 8:48 am
Need 4" Carbide disc or ring June 25, 2007, 8:41 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap