Drill chuck repair help needed...

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Drill chuck repair help needed... Spencer 02-28-2007
Posted by Spencer on February 28, 2007, 9:29 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joseph Gwinn on February 28, 2007, 11:49 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Spencer on March 1, 2007, 10:43 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
chuck removal help needed - 1/2 in. portable drill May 8, 2007, 2:55 pm
Jacobs #16 chuck repair June 30, 2007, 1:37 am
Southbend tailstock repair ideas needed May 19, 2007, 10:32 pm
Drill chuck February 28, 2007, 10:08 am
Drill Press Repair April 22, 2008, 5:03 pm
Drill chuck question November 27, 2006, 1:20 pm
standard drill chuck February 3, 2007, 11:48 pm
SPI brand drill chuck November 20, 2008, 7:37 am
Hopefully an easy drill chuck question December 2, 2006, 7:24 pm
Drill Press chuck alignment December 4, 2006, 11:36 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap