Emco lathe

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

08-01-2007

Posted by Charles on August 1, 2007, 10:56 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by F. George McDuffee on August 1, 2007, 11:42 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by dan pines on August 2, 2007, 3:12 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Nick Mueller on August 2, 2007, 3:46 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by David Kazdan on August 2, 2007, 9:24 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Emco lathe toolpath program?	May 27, 2007, 4:41 pm
Emco Compact 5 lathe / mill	September 25, 2008, 12:58 am
Proper lube for Emco MAXIMAT lathe?	June 8, 2008, 1:31 pm
Need source for downloading Emco Maier Compact 5 lathe manual	November 20, 2007, 10:19 pm
EMCO MAXIMAT 10	January 5, 2008, 3:46 am
EMCO 8.6 - tooling?	July 8, 2008, 10:40 am
Emco rotary table.	September 10, 2006, 4:20 pm
Exploded diagrams for EMCO	March 3, 2007, 3:25 am
Where's the EMCO-F1 CNC MILL Group Gone?	March 28, 2008, 2:30 pm
More Questions - Emco Compact5 CNC	July 15, 2008, 5:01 pm

XML Sitemap