Emco lathe toolpath program?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Emco lathe toolpath program? Dave, I can't do that 05-27-2007
Posted by Dave, I can't do that on May 27, 2007, 4:41 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on May 27, 2007, 6:58 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dave, I can't do that on May 27, 2007, 7:14 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on May 27, 2007, 9:27 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by DoN. Nichols on May 29, 2007, 1:50 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Emco lathe August 1, 2007, 10:56 pm
Proper lube for Emco MAXIMAT lathe? June 8, 2008, 1:31 pm
Need source for downloading Emco Maier Compact 5 lathe manual November 20, 2007, 10:19 pm
EMCO MAXIMAT 10 January 5, 2008, 3:46 am
EMCO 8.6 - tooling? July 8, 2008, 10:40 am
Emco rotary table. September 10, 2006, 4:20 pm
Exploded diagrams for EMCO March 3, 2007, 3:25 am
Where's the EMCO-F1 CNC MILL Group Gone? March 28, 2008, 2:30 pm
More Questions - Emco Compact5 CNC July 15, 2008, 5:01 pm
emco 220 strange error (emergency stop, etc) September 18, 2006, 12:31 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap