Enclosed digital height guage?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Enclosed digital height guage? Louis Ohland 08-02-2007
Posted by Louis Ohland on August 2, 2007, 12:40 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Louis Ohland on August 2, 2007, 12:41 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Nick Mueller on August 2, 2007, 1:44 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Louis Ohland on August 2, 2007, 5:47 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
FA: Starrett 24" Digital Height Gage July 14, 2006, 2:21 pm
FA: Mitutoyo 24" Digital Height Gage February 26, 2007, 10:12 am
500 ton height adjuster November 18, 2006, 2:14 am
New fuel guage May 4, 2007, 1:00 pm
Hydraulic press height March 22, 2007, 12:29 pm
scriber for a height gage? May 1, 2006, 5:38 am
Question about Mitituyo 12" Height MAster December 24, 2007, 5:20 pm
Common uses for Starret No. 643 depth guage July 5, 2006, 6:18 pm
Small Diameter Hole Guage December 3, 2006, 2:46 pm
anyone want a Trav-a-dial height gauge - trade for ??? September 17, 2006, 2:36 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap