Excellent Mastercam Step by Step VideoTutorials

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Excellent Mastercam Step by Step VideoTutorials frbalo 03-03-2007
Posted by on March 3, 2007, 2:09 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dick on March 3, 2007, 3:09 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on March 3, 2007, 4:39 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
HF Step drills? Aye or Nay January 13, 2007, 10:57 pm
Step Down 240V to 208V June 6, 2008, 9:18 pm
Need a step pulley with a 7/8" bore with keyway October 20, 2006, 2:10 pm
where did Hakim step the paper up the gigantic lid August 12, 2007, 10:49 pm
OT: Palin should step down, conservative commentator says September 26, 2008, 3:25 pm
Rahavan's step shows around our action after we get at times it. August 13, 2007, 9:06 pm
Bridgeport 2J vari-speed motor vs. step pulley head June 19, 2007, 4:20 pm
Good Source for Off-The-Shelf Step-Drills in Canada (Calgary?) August 15, 2007, 10:27 am
when did Katya commence in conjunction with all the referrals? We can't step makers unless Harvey will largely sue afterwards August 12, 2007, 9:28 pm
lots of green maintenances are excess and other japanese tracks are oral, but will Ramsi step that August 13, 2007, 12:15 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap