Exploded diagrams for EMCO

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Exploded diagrams for EMCO Wayne Fallows 03-03-2007
Posted by Wayne Fallows on March 3, 2007, 3:25 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by F. George McDuffee on March 3, 2007, 10:04 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Wayne Fallows on March 12, 2007, 8:35 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Lathe Tool Diagrams February 27, 2007, 6:26 am
shear and moment diagrams October 12, 2007, 11:20 am
Exploded NiCd Batteries January 20, 2007, 9:53 pm
14" metal cut-off wheel exploded on first cut. June 18, 2007, 11:03 am
Bridgeport vari-drive exploded view October 5, 2006, 1:47 pm
Hand held propane torch exploded in my neighborhood August 2, 2007, 5:39 pm
Emco lathe August 1, 2007, 10:56 pm
EMCO MAXIMAT 10 January 5, 2008, 3:46 am
EMCO 8.6 - tooling? July 8, 2008, 10:40 am
Emco rotary table. September 10, 2006, 4:20 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap