FA: Rockwell 15" Drill Press

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
FA: Rockwell 15" Drill Press Marty Escarcega 04-15-2007
Posted by Marty Escarcega on April 15, 2007, 9:09 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob Engelhardt on April 15, 2007, 11:39 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob in Phx on April 15, 2007, 9:12 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Parts Needed for old Delta/Rockwell Drill Press 15-655 September 29, 2006, 12:23 pm
How can I automatically tap 500 holes in 5/16-18 thread size using a hand drill or drill press? January 1, 2008, 6:18 pm
Drill Rob for Drill Press Runout July 4, 2006, 1:04 pm
MT2 drill bits vs. MT2 drill press August 30, 2006, 2:33 am
Re: Which HF drill press? Or neither? September 8, 2006, 9:01 pm
Re: Which HF drill press? Or neither? September 10, 2006, 3:05 am
drill press? January 11, 2007, 4:51 pm
Drill press January 18, 2007, 8:57 pm
jet drill press April 16, 2006, 2:39 pm
old VS 15" drill press? August 15, 2008, 6:35 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap