FF - small gear motor

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
FF - small gear motor Bob Engelhardt 08-07-2007
Posted by Bob Engelhardt on August 7, 2007, 12:17 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Stephen Robinson on August 8, 2007, 5:32 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob Engelhardt on August 8, 2007, 2:20 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Nick Hull on August 8, 2007, 6:50 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob Engelhardt on August 8, 2007, 2:09 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Small gear supplier December 22, 2007, 11:52 pm
small differential gear source? October 20, 2007, 6:21 pm
Gear rack sources for small quantities? April 24, 2006, 9:39 am
For the motor, gear & auto crowd November 18, 2007, 3:44 am
Curly wire on a 110V AC gear motor May 14, 2007, 8:42 am
making small involute spur gears with a CNC mill/lathe + gear hob? January 29, 2007, 5:35 pm
Shape an electric motor shaft/gear to drive a 5/16" rod? October 1, 2008, 2:21 pm
Remote mounting of Sieg X3 small mill motor controls August 1, 2007, 11:45 pm
how small a blower/vac for small bead blast cabinet -- micro cyclone? February 26, 2007, 1:19 am
using a DC motor as a generator, for an AC motor-driven DC welder (pix posted) May 21, 2008, 4:34 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap