Fitch Balancing Instructions

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Fitch Balancing Instructions Sierevello@aol.com 11-16-2006
Posted by Sierevello@aol.com on November 16, 2006, 12:18 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus18503 on November 16, 2006, 12:20 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on November 16, 2006, 10:35 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Anybody heard from Fitch? August 12, 2007, 2:58 am
Quillmaster instructions? January 5, 2007, 12:12 pm
Bender instructions... May 17, 2007, 10:09 am
OT - Online sharing of self written instructions? January 9, 2007, 8:03 am
Anyone interested in detailed instructions, with photos, on how to install a Z axis power feed on a Bridgeport mill? October 15, 2008, 10:08 am
Balancing Flywheels July 12, 2006, 9:09 pm
balancing a ceiling fan July 11, 2007, 7:58 pm
balancing wheels? April 28, 2006, 8:15 pm
Balancing 3 phase con. February 27, 2008, 3:30 pm
Balancing rpc's. August 6, 2008, 2:28 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap