Flexible Shaft torque vs. right angle gear drive

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Flexible Shaft torque vs. right angle gear drive jaket@surfy.net 02-02-2007
Posted by jaket@surfy.net on February 2, 2007, 2:26 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Nick Mueller on February 2, 2007, 2:29 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ian Stirling on February 2, 2007, 9:34 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Richard J Kinch on February 2, 2007, 2:43 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ned Simmons on February 2, 2007, 2:56 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Flexible small drive shaft? August 25, 2007, 7:41 pm
fa - nice new right angle drive gear assembly December 30, 2007, 1:13 am
Shape an electric motor shaft/gear to drive a 5/16" rod? October 1, 2008, 2:21 pm
FA: hydraulic pump, right angle gear drive, very heavy caster, Oil pump from large milling machine April 26, 2006, 1:29 am
Do you need information on Flexible Shaft Grinders June 11, 2007, 8:49 am
Re: 45 degree angle drive? March 7, 2006, 7:04 pm
Prop shaft taper angle? September 10, 2006, 12:35 pm
Looking for right angle bevel gear box please... March 20, 2006, 1:06 pm
got the bent shaft out of the gear OK September 27, 2006, 5:36 pm
DRIVE GEAR & WORM question September 9, 2007, 7:52 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap