Garden Tractor Demolition / Cutting up steel - How and how fast can I do it?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Garden Tractor Demolition / Cutting up steel - How and how fast can I do it? djenyc 09-06-2007
Posted by djenyc on September 6, 2007, 4:32 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus7495 on September 6, 2007, 4:42 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Wilkins on September 6, 2007, 4:54 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by djenyc on September 6, 2007, 5:07 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by 42etus on September 6, 2007, 10:20 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Fast cutting drill bit for mild steel March 15, 2006, 8:23 pm
steel cutting cold saw? March 8, 2007, 9:25 pm
Cutting steel plate September 3, 2008, 12:20 am
Extending Demolition Hammer Bit January 27, 2007, 3:26 am
cutting steel plate with circular saw? January 9, 2007, 10:01 am
Cutting 10 guage plate steel with a Skill saw. March 30, 2007, 1:00 am
cutting a ~ 1 inch think steel pipe - use a hacksaw? March 20, 2006, 5:31 pm
What mcmaster item for cutting fluid (lathe+steel) August 3, 2008, 11:29 pm
Buying Band saw- advice needed- mild steel cutting September 12, 2008, 9:58 am
Buying thread cutting taps dies and best type of tool steel to use???? February 20, 2008, 4:29 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap