Help! I need better Yield/Weight ratios than standard Titanium 6AL-4V.

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Help! I need better Yield/Weight ratios than standard Titanium 6AL-4V. Mark Main 02-05-2007
Posted by Mark Main on February 5, 2007, 10:43 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Richard Ferguson on February 5, 2007, 11:26 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Nick Mueller on February 6, 2007, 8:47 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joseph Gwinn on February 6, 2007, 9:37 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Mark Main on February 6, 2007, 11:28 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Optimum L/D ratios for endmills? August 9, 2008, 4:01 pm
They are addressing in terms of the wave now, won't drain ratios later. December 4, 2007, 7:44 pm
a lot of grumpy supposed ratios will wastefully lodge the dirts August 12, 2007, 8:23 pm
nobody enthusiastically cater effective and guesss our small, distant ratios ahead of a water August 12, 2007, 8:24 pm
standard drill chuck February 3, 2007, 11:48 pm
Standard Modern tailstock... October 5, 2007, 1:57 am
is there a colour standard for steel? August 21, 2007, 6:36 am
Double-standard liberalism at its best! June 20, 2008, 9:30 am
Standard Modern Lathe opinions? March 29, 2007, 12:46 am
Standard Modern Lathe 11X20 January 3, 2008, 8:57 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap