Help with lathe threads

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

Help with lathe threads

Paul

04-30-2007

Re: Help with lathe threads

Joe Landau

05-01-2007

Re: Help with lathe threads

Joe Landau

05-01-2007

Posted by on April 30, 2007, 11:57 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by Joe Landau on May 1, 2007, 2:13 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Joe Landau on May 1, 2007, 2:36 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Lathe Chuck Wrench and Toolholder Threads	December 8, 2006, 12:20 am
Re: can you tap large diameters w/ lathe? tapping acme threads?	March 14, 2006, 4:40 pm
5/16-27 threads	August 8, 2008, 3:03 pm
More on odd threads....	September 26, 2008, 8:28 pm
Threads question	August 14, 2007, 2:12 am
'hand' die cut threads ; 1/2" NC .... ??how??	April 12, 2006, 10:52 pm
cutting npt threads	March 23, 2006, 6:34 am
Threads off axis	June 28, 2008, 10:10 pm
Module & Diametral threads?	January 11, 2007, 4:21 pm
Need advice... have to cut 1/4 - 20 threads in 1/2" aluminum	March 24, 2007, 7:39 pm

XML Sitemap