Horiz. Mill Suggestion/heads Up.

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Horiz. Mill Suggestion/heads Up. JimL 02-22-2007
Posted by JimL on February 22, 2007, 8:44 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on February 23, 2007, 12:10 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on February 23, 2007, 1:59 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tony on February 23, 2007, 7:40 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Griz.horiz.b/s-blade popping off??? March 16, 2006, 9:31 pm
What Mill September 24, 2006, 11:53 pm
Mill from HF October 1, 2006, 4:13 am
used mill November 10, 2006, 10:44 pm
What end mill to buy? December 17, 2006, 3:40 am
if you could buy a NEW mill .. ? December 19, 2006, 9:52 pm
DRO use on mill February 25, 2007, 9:49 am
I Got myself a "New to me" mill April 6, 2007, 3:48 pm
Looking for used mill April 26, 2008, 8:45 pm
Anybody have a tracer mill? July 8, 2006, 7:32 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap