Hydraulic Pump question

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Hydraulic Pump question Andy H 11-05-2006
Posted by Andy H on November 5, 2006, 2:31 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Anthony on November 5, 2006, 10:15 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bill Marrs on November 5, 2006, 11:12 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Andy H. on November 8, 2006, 8:18 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Wayne Cook on November 8, 2006, 10:52 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Hydraulic Pump novice question March 19, 2007, 1:03 am
FA: hydraulic pump, right angle gear drive, very heavy caster, Oil pump from large milling machine April 26, 2006, 1:29 am
FS: Air/Hydraulic Pump on Ebay December 24, 2006, 10:07 am
Hydraulic engine as pump September 19, 2007, 10:02 am
Quietest Hydraulic pump/motor April 27, 2006, 11:51 am
Hydraulic Pump Arimitsu Britt March 25, 2008, 8:37 pm
Small hydraulic pump needed November 12, 2008, 10:39 am
FA: 24 V 1 HP hydraulic pump with accessories - surplus from A-3J ground test equipmetn July 4, 2006, 10:20 pm
Variable flow/volume from a hydraulic constant speed pump April 5, 2007, 5:52 pm
who wanted a smallish hydraulic cylinder? hand pump? stuff FA April 7, 2006, 8:19 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap