Hydraulic fitting - thread confusion.

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Hydraulic fitting - thread confusion. mike8675309 08-18-2006
Posted by on August 18, 2006, 11:51 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bill Marrs on August 18, 2006, 12:41 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on August 18, 2006, 3:23 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Mark Rand on August 18, 2006, 6:59 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Eric R Snow on August 18, 2006, 7:30 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
OT: Help identifying a hydraulic fitting May 10, 2006, 2:54 pm
Could someone help me ID the thread on a male fitting July 14, 2006, 1:12 am
brass pipe fitting? need 1/4" NPT true wye fitting source November 3, 2006, 10:23 am
Welding Confusion Questions and (minor) RANT. August 29, 2007, 5:42 am
Looking for fitting (plastic) June 3, 2007, 11:13 pm
Leaking air hose fitting November 15, 2006, 11:36 pm
hose fitting identify help March 7, 2007, 8:23 am
OT-Dishwasher QC hose fitting? June 5, 2007, 10:05 am
Re: Another 4-start thread question - 1/4" internal thread April 2, 2006, 5:25 pm
Aeroquip fitting for 30mm ID hole? June 15, 2008, 5:16 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap