Installation of a DRO (on a mill) -- ping Tom Gardner

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Installation of a DRO (on a mill) -- ping Tom Gardner Ignoramus22010 07-10-2007
Posted by Ignoramus22010 on July 10, 2007, 9:26 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tom Gardner on July 10, 2007, 10:55 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Louis Ohland on July 10, 2007, 11:05 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus22010 on July 10, 2007, 11:34 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tom Gardner on July 13, 2007, 6:05 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
PING Tom Gardner September 17, 2006, 12:27 pm
Ping Tom Gardner October 10, 2006, 11:12 am
Ping Tom Gardner June 11, 2007, 3:09 pm
PING: Tom Gardner April 13, 2006, 5:35 pm
Ping tom Gardner! OT how to cut nylon brush:-) December 27, 2007, 9:51 pm
Rebuilding a trailer - what to do about the deck... (& Ping Tom Gardner) December 29, 2007, 11:19 pm
PING: Tom Gardner - the wire brush guru! May 15, 2008, 3:16 pm
Ping Tom Gardner-Brush suggestion questions July 5, 2008, 4:49 am
PING: Unca George: Recommendation of "Turret Mill Operation" by John G. Edwards October 25, 2008, 11:05 pm
Attn Tom Gardner October 9, 2006, 7:30 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap