|
Posted by Wes on March 21, 2008, 3:11 pm
Please log in for more thread options
>I have a brand-spankin'-new Kurt D675 vise (no oopses yet) and I needed a way
to
>do angled slots. I found this swivel base on eBay
>http://cgi.ebay.com/KURT-SWIVEL-BASE-for-6-VISE-D60-D675-D688_W0QQitemZ190206341395QQihZ009QQcategoryZ25297QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
>BUT...my little brain doesn't see how this fits, it seems like I need some
other
>part. I confess, I didn't take the vise off of the mill because it's within
>half a thou of perfect and somebody's got a job in process. I picked-up a
>cheapie 4" swivel vise at the local store for the immediate job and actually,
>it's pretty nice! But, I wonder if the attachment for the Kurt would be a good
>investment and if I would just leave it on all the time or is there a downside
>to that.
That round thing in the center is a pin that fits a hole in the bottom of
your vise. There is a tee slot groove milled around the diameter of the
base that matches up with the tee slot holes in your vise.
Wes
--
"Additionally as a security officer, I carry a gun to protect
government officials but my life isn't worth protecting at home
in their eyes." Dick Anthony Heller
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap