|
Posted by rt on November 20, 2006, 1:00 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
|
Posted by Bill Marrs on November 20, 2006, 2:13 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
|
Posted by John Martin on November 20, 2006, 2:35 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
| Similar Threads | Posted | | Making taper attachment for lathe - what range of taper? | August 28, 2006, 8:33 am |
| why is there a morse taper in the back end of my lathe spindle | November 10, 2006, 1:05 pm |
| Anybody know sources for Brown & Sharpe #5 taper lathe tooling? | June 3, 2007, 3:47 pm |
| Rockwell-Delta 10 inch lathe spindle taper? | May 4, 2006, 8:55 am |
| shank adapter, extension rod, button bit, thread bit,taper bit, taper rod, drill rod, drill bit, corss bit, chisel bit, DTH hammer drilling ,rock drill, drill tube, casing shoe, drilling tool, core bit, core barrel, ODEX, TUBEX, quarrying,mining equipment | September 8, 2006, 2:22 am |
| JD tie rod end taper? | June 14, 2008, 8:44 pm |
| How do I set up to machine a MT2 taper? | November 24, 2006, 7:57 am |
| TAPER ATTACHMENT | February 10, 2007, 4:50 am |
| NST40 Taper? | February 27, 2007, 1:31 pm |
| Taper tolerances | August 6, 2007, 3:03 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore