Loose threads for 6-32 taps

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Loose threads for 6-32 taps Dave99 01-22-2008
Posted by Dave99 on January 22, 2008, 3:41 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Lloyd E. Sponenburgh on January 22, 2008, 3:54 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by pdrahn@coinet.com on January 22, 2008, 3:56 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by spaco on January 22, 2008, 4:50 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by John Martin on January 22, 2008, 9:52 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Some times ya win, somtimes ya loose, September 9, 2006, 7:36 pm
lots of printers will be integrated loose manufacturings August 12, 2007, 9:09 pm
Source for loose 3mm ball bearings needed March 20, 2008, 10:35 pm
Re: Trepanning and Parting Off - Loose Gibs Chatter Chips May 4, 2008, 6:59 pm
Re: Trepanning and Parting Off - Loose Gibs Chatter Chips May 4, 2008, 7:47 pm
Re: Trepanning and Parting Off - Loose Gibs Chatter Chips May 5, 2008, 3:20 am
Clausing 5914 - Loose spindle bearing tightened May 31, 2008, 9:23 pm
who Ziad's hostile prejudice boasts, Georgette sorts amid loose, consistent countys August 13, 2007, 1:16 am
Re: Help with little taps August 15, 2006, 6:14 pm
Re: Help with little taps August 15, 2006, 6:06 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap