|
Posted by Tom Gardner on May 7, 2008, 10:22 pm
Please log in for more thread options
I put an ad on Craig's list at 11:00 AM and had my first call in an hour! My
ad:
Part-time machinist / machine builder wanted. Flexible hours, retired person OK.
We need you to make and assemble machine parts from prints and examples.
216-791-3265
The first guy interviewed at 3:00 PM and he works about 2 miles away as a CNC
programmer with 20 years previous experience as a tool and die maker. We seemed
to be on the same page as far as expectations on both sides. I'm hoping for a
"Human CAD/CAM" system, I just have to dream-up stuff, draw it, and it will
magically appear as finished parts and assemblies! The big advantage I see is
he'll be all mine, nobody will redirect his time and efforts as he will be
coming in for a few hours as everybody else is going home.
I've gotten 6 calls so far with two other guys that sound good. Three bowed out
when I told them what part of town I am in...the wimps.
|
|
Posted by Spehro Pefhany on May 8, 2008, 9:37 am
Please log in for more thread options
On Wed, 7 May 2008 22:22:55 -0400, "Tom Gardner"
>I put an ad on Craig's list at 11:00 AM and had my first call in an hour! My
>ad:
>
>Part-time machinist / machine builder wanted. Flexible hours, retired person
OK.
>We need you to make and assemble machine parts from prints and examples.
>216-791-3265
>
>The first guy interviewed at 3:00 PM and he works about 2 miles away as a CNC
>programmer with 20 years previous experience as a tool and die maker. We
seemed
>to be on the same page as far as expectations on both sides. I'm hoping for a
>"Human CAD/CAM" system, I just have to dream-up stuff, draw it, and it will
>magically appear as finished parts and assemblies! The big advantage I see is
>he'll be all mine, nobody will redirect his time and efforts as he will be
>coming in for a few hours as everybody else is going home.
>
>I've gotten 6 calls so far with two other guys that sound good. Three bowed
out
>when I told them what part of town I am in...the wimps.
Benefits: Company-supplied sidearm and subsidized ammunition. Shooting
lessons.
Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
|
|
Posted by Tom Gardner on May 8, 2008, 11:13 am
Please log in for more thread options
> On Wed, 7 May 2008 22:22:55 -0400, "Tom Gardner"
>
>>I put an ad on Craig's list at 11:00 AM and had my first call in an hour!
>>My
>>ad:
>>
>>Part-time machinist / machine builder wanted. Flexible hours, retired
>>person OK.
>>We need you to make and assemble machine parts from prints and examples.
>>216-791-3265
>>
>>The first guy interviewed at 3:00 PM and he works about 2 miles away as a
>>CNC
>>programmer with 20 years previous experience as a tool and die maker. We
>>seemed
>>to be on the same page as far as expectations on both sides. I'm hoping
>>for a
>>"Human CAD/CAM" system, I just have to dream-up stuff, draw it, and it
>>will
>>magically appear as finished parts and assemblies! The big advantage I
>>see is
>>he'll be all mine, nobody will redirect his time and efforts as he will be
>>coming in for a few hours as everybody else is going home.
>>
>>I've gotten 6 calls so far with two other guys that sound good. Three
>>bowed out
>>when I told them what part of town I am in...the wimps.
>
> Benefits: Company-supplied sidearm and subsidized ammunition. Shooting
> lessons.
> Best regards,
> Spehro Pefhany
> --
> "it's the network..." "The Journey is the reward"
> speff@interlog.com Info for manufacturers:
> http://www.trexon.com
> Embedded software/hardware/analog Info for designers:
> http://www.speff.com
Well, I DO have an indoor range...when production employees aren't in the
way. The best marksman here isn't the Viet Nam Special Forces Veteran, it's
my bookkeeper!
|
|
Posted by RAM³ on May 8, 2008, 2:41 pm
Please log in for more thread options
>
>> On Wed, 7 May 2008 22:22:55 -0400, "Tom Gardner"
>>
>>>I put an ad on Craig's list at 11:00 AM and had my first call in an
>>>hour! My
>>>ad:
>>>
>>>Part-time machinist / machine builder wanted. Flexible hours, retired
>>>person OK.
>>>We need you to make and assemble machine parts from prints and
>>>examples. 216-791-3265
>>>
>>>The first guy interviewed at 3:00 PM and he works about 2 miles away
>>>as a CNC
>>>programmer with 20 years previous experience as a tool and die maker.
>>> We seemed
>>>to be on the same page as far as expectations on both sides. I'm
>>>hoping for a
>>>"Human CAD/CAM" system, I just have to dream-up stuff, draw it, and
>>>it will
>>>magically appear as finished parts and assemblies! The big advantage
>>>I see is
>>>he'll be all mine, nobody will redirect his time and efforts as he
>>>will be coming in for a few hours as everybody else is going home.
>>>
>>>I've gotten 6 calls so far with two other guys that sound good.
>>>Three bowed out
>>>when I told them what part of town I am in...the wimps.
>>
>> Benefits: Company-supplied sidearm and subsidized ammunition.
>> Shooting lessons.
>> Best regards,
>> Spehro Pefhany
>> --
>> "it's the network..." "The Journey is the
>> reward" speff@interlog.com Info for manufacturers:
>> http://www.trexon.com
>> Embedded software/hardware/analog Info for designers:
>> http://www.speff.com
>
>
> Well, I DO have an indoor range...when production employees aren't in
> the way. The best marksman here isn't the Viet Nam Special Forces
> Veteran, it's my bookkeeper!
>
>
>
Is that marks_man_ or marks_woman_? <grin>
|
|
Posted by Wes on May 8, 2008, 9:18 pm
Please log in for more thread options
>The best marksman here isn't the Viet Nam Special Forces Veteran, it's
>my bookkeeper!
Accountants are more deadly than Special Forces, Delta Team, or Seals.
Wes
|
| Similar Threads | Posted | | possible gloat, or is it just a femto-gloat? and what the heck is this thing? | October 19, 2006, 3:20 am |
| [FS] Machinist Tools | July 28, 2007, 11:30 am |
| Dallas machinist 2, Bad guys 0 | October 15, 2007, 3:20 pm |
| Frugal Machinist Web Site | May 10, 2006, 12:54 am |
| looking for Jan/Feb 06 Home Shop Machinist | April 21, 2006, 4:05 pm |
| Digital Machinist index anyone? | January 14, 2008, 9:43 am |
| Harbor Freight's "machinist vise" | October 9, 2006, 6:21 pm |
| Record 5" Machinist Bench Vice | November 8, 2006, 8:47 pm |
| Any Home Shop Machinist in San Francisco? | December 16, 2006, 12:21 pm |
| Re: Any Home Shop Machinist in Austin TX. | December 16, 2006, 9:17 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>ad:
>
>Part-time machinist / machine builder wanted. Flexible hours, retired person