Making Shaft guide/holders

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Making Shaft guide/holders Searcher7 12-20-2006
Posted by Searcher7 on December 20, 2006, 10:44 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Searcher7 on December 23, 2006, 2:28 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Searcher7 on December 23, 2006, 2:29 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Making a handle and a shaft May 14, 2006, 1:45 am
>>>>>>>Making a Six-Figure Income From Passive / Money Making Tips its FREEEE <<<<<<< November 26, 2007, 3:29 pm
Shaft keys .... December 6, 2006, 2:20 am
Looking for "shaft coupler" April 10, 2007, 12:43 pm
Shaft Wear May 9, 2006, 9:44 pm
Re: Shaft extention July 18, 2008, 12:38 am
Re: Shaft extention July 18, 2008, 5:53 am
Re: Shaft extention July 18, 2008, 10:29 am
Re: Shaft extention July 18, 2008, 11:37 am
got the bent shaft out of the gear OK September 27, 2006, 5:36 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap