Measuring torque on lead screw

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Measuring torque on lead screw Bob Engelhardt 01-12-2008
Posted by Bob Engelhardt on January 12, 2008, 3:11 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Richard J Kinch on January 12, 2008, 3:26 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob Engelhardt on January 13, 2008, 8:15 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Richard J Kinch on January 13, 2008, 11:00 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jerry Foster on January 12, 2008, 5:21 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Measuring torque on a motor with a leadscrew with a torque wrench January 21, 2008, 2:49 pm
Metric lead screw and nut December 27, 2006, 2:02 pm
the most inexpensive lead screw needed July 29, 2007, 5:47 pm
Lead screw load/size question January 19, 2007, 7:58 pm
Extending the lead-screw of my small vertical mill February 6, 2007, 2:14 pm
Cutting metric threads on non metric lead screw April 22, 2007, 5:44 pm
FA: Royal 5C Collets, Measuring etc January 21, 2007, 8:27 pm
Measuring shallow bore June 8, 2007, 1:24 am
Measuring spindle runout June 9, 2007, 10:44 pm
Measuring Housings of complex shapes December 5, 2006, 5:49 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap