Melting aluminum

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Melting aluminum Ivan Vegvary 10-05-2007
Posted by Ed Huntress on October 5, 2007, 7:48 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Wes on October 5, 2007, 9:33 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Larry Jaques on October 5, 2007, 10:59 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ed Huntress on October 5, 2007, 11:12 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Robert Swinney on October 5, 2007, 1:35 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Re: Melting (Boiling!) aluminum with diesel fuel September 18, 2006, 11:07 am
Re: Melting (Boiling!) aluminum with diesel fuel September 18, 2006, 7:15 pm
Re: Melting (Boiling!) aluminum with diesel fuel September 18, 2006, 8:06 pm
FS: 1952 Reynolds Aluminum book: "Machining Aluminum Alloys" April 12, 2006, 6:33 pm
Re: Melting down wingers October 5, 2008, 8:21 pm
Re: Melting down wingers October 5, 2008, 8:21 pm
Re: Melting down wingers October 6, 2008, 12:00 am
Cast aluminum with embeded 6061-T6 aluminum rods August 14, 2007, 5:49 pm
Melting iron with waste oil July 3, 2006, 12:24 pm
low melting point metal August 8, 2007, 8:33 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap