Metal Mill and Lathe Project.

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Metal Mill and Lathe Project. ToolMaker1976 12-05-2006
Posted by ToolMaker1976 on December 5, 2006, 11:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Lance A Boyle on December 5, 2006, 11:51 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Trevor Jones on December 6, 2006, 8:33 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by werty on December 6, 2006, 3:10 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dave Lyon on December 6, 2006, 3:16 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Metal project (sawmill) November 7, 2008, 3:05 pm
Jar Jet, My saturday metal working project September 16, 2007, 1:31 am
pyro project w/metal content September 30, 2008, 12:57 pm
Where to buy sheet metal for small craft project October 5, 2007, 6:03 pm
Nice Metal and Concrete Construction Project March 20, 2008, 5:05 am
First lathe project - replacment knobs for my router fence July 23, 2008, 4:29 pm
36" metal door, which mill will fit thru it? October 18, 2007, 10:58 am
Basic Metal mill question July 6, 2006, 12:57 pm
Mill or lathe? August 19, 2008, 1:01 am
hobby lathe and mill October 12, 2006, 3:09 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap