Metal cutting bandsaw: Help please

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Metal cutting bandsaw: Help please HC 04-30-2007
Posted by HC on April 30, 2007, 1:36 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jerry Foster on April 30, 2007, 1:55 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by HC on April 30, 2007, 2:05 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by HC on May 9, 2007, 10:46 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by JohnM on April 30, 2007, 5:16 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Metal cutting bandsaw. December 27, 2006, 7:14 am
Easy Metal cutting bandsaw April 17, 2006, 2:32 am
cutting sheet aluminum on 12 inch wood bandsaw June 19, 2008, 3:27 pm
Bandsaw question - wood vs. metal versions September 28, 2006, 12:21 am
about the HF metal cutting saw August 26, 2007, 2:05 pm
Coldsaw vs. Metal-cutting saw? April 27, 2006, 7:03 pm
Metal cutting reciprocal saw blades November 17, 2006, 10:36 am
Metal Cutting Principles, the tome April 14, 2007, 5:03 pm
Need advice on metal cutting tool.... August 12, 2007, 4:43 am
differentiated thought before cutting metal September 5, 2008, 12:24 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap